setup_background_v2_30perce
CenterlessGrinder-header_v3

REGENT RC-16 CENTERLESS GRINDER FOR SALE

REGENT RC-16 Centerless Grinder

Model: RC-16
Year: @1989 + one year
Serial#: 16095
Location : Dallas, TX

Machinery List

1 - REGENT RC-16 Centerless Grinder
1 – thru- feed workrest on machine
1 – thru- feed workrest disassembled
2 – in-feed workrests
1 – hydraulic part ejector w/actuator switch mounted on machine.  ( unit is mounted on the top of the hydraulic unit shown in photo)
1 – balancing stand and arbor for wheel balancing
1 – small bar feed attachment (built by R.W.S. Co.) for small rods
2 – grinding wheel hubs and flanges (one is mounted on machine)
1 – wrench for removing hub

Please call or email
Barron Smith for more info:
(214) 748-1699 or
Smithrwco@aol.com

Click Here For Complete Machine Description and Details
rwsmithco7
rwsmithco10
RWSmithco1[1]
rwsmithco4[1]
rwsmithco5[1]
rwsmithco6[1]
rwsmithco2[1]
rwsmithco3[1]
rwsmithco11
rwsmithco12
rwsmithco9
rwsmithco8[1]

REGENT RC-16

  • Model: RC-16
  • Year: @1989 + one year
  • Serial#: 16095
  • Location : Dallas, TX

 

MACHINE DETAILS

  • Machine is under power and running.
  • Hydraulic dressers on both grinding and regulating wheels
  • Outboard bearing support on both grinding and regulating wheels
  • Both wheel dressers have profile truing attachments and one flat template each
  • Hydraulic unit is stand alone w/pressure gage
  • Coolant tank and pump (no paper filtration or magnetic separation)
  • One shot lube system for the machine ways
  • Hydraulic part ejector with actuator switch mounted on the machine (handle side above transmission)
  • Grinding wheel 16x6x10
  • Regulating wheel 10x6x5
  • Spindle 15 HP @ 1600 RPM
  • Spindle was rebuilt in 2000 by Apollo Machine Tool Services in the Dallas/Ft. Worth area. We have this paperwork.
  • Regulating wheel 13-308 RPM
  • 10 step manual transmission
  • Weight 4,700 lbs.
  • Capacity .040-2.0” (can go up to 6.0” according to manual)

ATTACHMENTS

  • 1 – thru- feed workrest on machine
  • 1 – thru- feed workrest disassembled
  • 2 – in-feed workrests
  • 1 – hydraulic part ejector w/actuator switch mounted on machine. 
    ( unit is mounted on the top of the hydraulic unit shown in photo)
  • 1 – balancing stand and arbor for wheel balancing
  • 1 – small bar feed attachment (built by R.W.S. Co.) for small rods
  • 2 – grinding wheel hubs and flanges (one is mounted on machine)
  • 1 – wrench for removing hub



PRICE: PLEASE CALL FOR DETAILS
(214) 748-1699
Ask for Barron

 

Back to Grinders for Sale page

Back to home page

All Content Copyrighted by CenterlessGrinder.com unless otherwise noted
© Copyright 2007 - 2008 CenterlessGrinder.com All Rights Reserved